Want to Try Your Hand at Laying Tiles?

Tile installation can be an easy DIY job for any homeowner. They are quite inexpensive, and if you are able to finish the installation yourself, it can be a cheap home remodelling project. A professional tile contractor will install them on floors, walls and backsplashes. However, if you are interested in installing them yourself, there are a few things that you need to take into consideration.

Installing tilesman installing tiles works better if the surface which you are applying them on is leveled and sturdy. For instance, if the floor that you are working on is not even, any movement will make the tiles crack once they are installed. If the area where you install them is not sturdy, you may want to pull up the subflooring and replace them. Making the time to do this before laying them will save you a lot of time and money in the long run.

Some of the older houses could be sturdy, but not even. Even if there is a slight slope, you can correct this when laying your tiles. To do this, simply apply a thicker layer of mortar when installing them. However, if the difference is more than a quarter of an inch, you have to even out the floor before doing any work.

The first thing when laying tiles is to apply the underlay. Some tile contractor experts place them right onto plywood; however, you will get a better result using a cement board. This will provide a more stable support for them, stopping them from cracking or bending. Each manufacturer has their own recommendations for using cement board. Normally, you should use thin set mortar and screws to secure the board to the subflooring.

Once this is done, you can start working on your floor. Before mixing your mortar, first perform a dry fit. To do this, lay the tiles on the floor. This is done to ensure they are properly centered. Begin in the center of the room, and then work your way out.

Call Ceramic Solutions based in Knoxville TN.
(865) 621-1717.